What is your favorite CD/DVD R/RW Writing Speed...

[chaminga_d]

Normally if i going to write a cd to use in pc... i'll use the maximum speed..
or
If i use it in other player.... i'll use some lower speed.....

[Anusha]

Maximum speed the CD supports
But I hardly burn any CDs (like two or three per year).

[fazaal24]

yeah da maxximum da CD supports....

[fazaal24]

Maximum speed the CD supports
But I hardly burn any CDs (like two or three per year).

2 or 3 per yeah???oh maann:rolleyes: :rolleyes: :eek: :eek: :D :D

[Tissaka]

my rom is a combo sh*t.. maximum is 24X.. cuz it's a laptop.. :(

[Anusha]

2 or 3 per yeah???oh maann:rolleyes: :rolleyes: :eek: :eek: :D :D
I use DVDs

[crazy life]

well....I do burn DVD's 8x,cz to support older DVD readers.
CDs 4-52x,it depends on the usage purpose
RAM 4x

[Anusha]

If the DVD is good, I'll burn them at 12X otherwise even 4x.

[eranda]

Normally i use 16x for CDs....
But i have burned in max speed..
They also works well.......

[ifadh132]

i burn @ 8x

[prasadana2]

normally
16-24 Coz my Disk men don support more than that..
Or 24 to 52 For PC Normally 24.

[shanX]

CD-R @ 8x or 24x

[zCexVe]

Video-16X
Audio-16X
mp3-24X
Data-24X
DVD+/-R-8X
DVD+RW-4X

CDs r burnt for maximum support for players.DVDs too like that
Remember the fast the CD u write more high the possibilty of error rate.
If u scratch a 52X written and 16X written which hav same data still u can read the 16 but not the 52.

[Anusha]

Video-16X
Audio-16X
mp3-24X
Data-24X
DVD+/-R-8X
DVD+RW-4X

CDs r burnt for maximum support for players.DVDs too like that
Remember the fast the CD u write more high the possibilty of error rate.
If u scratch a 52X written and 16X written which hav same data still u can read the 16 but not the 52.
Then what's the point of releasing faster drives?

[shanX]

Then what's the point of releasing faster drives?
Yeah, I wonder @ times... But I prefer to save another blank cd :lol:

[Anusha]

Yeah, I wonder @ times... But I prefer to save another blank cd :lol:
How much is a TDK 52x disc these days?

[zCexVe]

How much is a TDK 52x disc these days?
Starting frm 35 rs.

[zCexVe]

Then what's the point of releasing faster drives?
They r for High quality medias.For an AL , Princo 52 X will be Fatal :lol:

[Anusha]

Starting frm 35 rs.
They used to be Rs.30/= :rolleyes: :rolleyes:

[Anusha]

They r for High quality medias.For an AL , Princo 52 X will be Fatal :lol:
So go and buy good ones :rolleyes:

[zCexVe]

Hey tissaka be careful when giving ur IP out.See what I got on ur IP.
**********************
***********************************
inetnum: 222.165.128.0 - 222.165.191.255
netname: LKTELECOM-LK
descr: Sri Lanka Telecom
descr: Internet Service Provider in Sri Lanka
country: LK
admin-c: ID1-AP
tech-c: ID1-AP
status: ALLOCATED PORTABLE
mnt-by: APNIC-HM
mnt-lower: MNT-SLT-LK
remarks: -+-+-+-+-+-+-+-+-+-+-+-++-+-+-+-+-+-+-+-+-+-+-+-+-+-+
remarks: This object can only be updated by APNIC hostmasters.
remarks: To update this object, please contact APNIC
remarks: hostmasters and include your organisation's account
remarks: name in the subject line.
remarks: -+-+-+-+-+-+-+-+-+-+-+-++-+-+-+-+-+-+-+-+-+-+-+-+-+-+
changed: [/EMAIL]**************20040927
source: APNIC

person: ********************
address: SRI LANKA TELECOM INTERNET
address: DATA COMMUNICATION DIVISION
address: FIFTH FLOOR
address: OTS BUILDING
address: SRI LANKA TELECOM
address: LOTUS ROAD
address: COLOMBO 1
country: LK
phone: +94-1-*******
phone: +94-1-*********
fax-no: +94-1-**********
e-mail: **********[EMAIL="[email protected]"] ([email protected])
nic-hdl: ID1-AP
mnt-by: MAINT-NULL
changed: *****************19980625
source: APNIC
Good trhat I'm no hacker.There r more info that can be retrieved.All asterics places had data

[zCexVe]

So go and buy good ones :rolleyes:
Ayyage ATM card eka dennako mata TDK , Mitsubishi eva ganna..

[Anusha]

Ayyage ATM card eka dennako mata TDK , Mitsubishi eva ganna..
I can't. I won't!!!

[shanX]

How much is a TDK 52x disc these days?
Wow, havnt atleast bought one blank , for more than 30/= for last 3-4 yrs :lol: :lol:

[Anusha]

Wow, havnt atleast bought one blank , for more than 30/= for last 3-4 yrs :lol: :lol:
:shocked: :lol: :lol: :lol:

[chaminga_d]

Good trhat I'm no hacker.There r more info that can be retrieved.All asterics places had data

Ayyo... oya telecom eke data ne. .

[shanX]

:shocked: :lol: :lol: :lol:
Yeah, It's useless, unless you're doing some big data centre

[Anusha]

Yeah, It's useless, unless you're doing some big data centre
Better to burn quickly. Too much heat for too long is bad for the drive as well ne?

[fazaal24]

I use DVDs


ooh there u go

[shanX]

Better to burn quickly. Too much heat for too long is bad for the drive as well ne?
Good point to consider speed in future :yes:

[lasanka]

hmm max speed if for the comp...
if its ofr the car then i burn at 24x

[Anusha]

hmm max speed if for the comp...
if its ofr the car then i burn at 24x
Does it really make a difference?

[shanX]

Does it really make a difference?
Yeah :lol: He has a car

[chaminga_d]

hmm max speed if for the comp...
if its ofr the car then i burn at 24x

some old car cd players cannot read cds that written in high speed...

[lasanka]

Yeah :lol: He has a car
lol its the family car LOL..
and ya if u burn at two high a speed the car stereo may not be able to read it...
some players jus work upto 24x/.... so i use dat to be safe... besides im usin nero 7 ultra so even at 24x it jus takes like 6 mins to burn a full disk.. maybe less hehe:rolleyes:

[chaminga_d]

Yeah He has a car

You have a Van ne....

[lasanka]

too*

[shanX]

You have a Van ne....
Me? Yeah

I write Audio cd's @ 8x

[lasanka]

ahhh shape but u can go upto 16x for sure shan it will work

[Anusha]

Yeah :lol: He has a car
:P :P :P

[Anusha]

and ya if u burn at two high a speed the car stereo may not be able to read it...

May? :rolleyes: :rolleyes:

[lasanka]

yup anudsha may************* depends on the player...

[lasanka]

anusha*** sozz

[Anusha]

yup anudsha may************* depends on the player...
Oh whatever. Who cares....we don't have a CD Player in our car.

[lasanka]

oh well no worries den.. still it was for those hu do have a cd player in the car...
\hehe

[chaminga_d]

we don't have a CD Player in our car.

Ha Ha... oyatath car ekak thiyenawane....

[zCexVe]

fix a portable player like our frnds do.My frnd hav fixed a portable player and two desktop pc speakers in his car.Thats cool man...

[zCexVe]

Ayyo... oya telecom eke data ne. .
asterix gahala thiyena evath?Its good that in SL we dont get our own IP.If not u r in danger...

[Anusha]

Ha Ha... oyatath car ekak thiyenawane....
we don't have a CD Player in our car.
I said, OUR car

[shanX]

fix a portable player like our frnds do.My frnd hav fixed a portable player and two desktop pc speakers in his car.Thats cool man...
Nutters :lol:

[lasanka]

portable player... hmmmm ya dats gud nuh

[Anusha]

Nutters :lol:
:yes: :yes: :yes:

[zCexVe]

Nutters :lol:
I dont knw whats wrong with u.Might be the place.Always want the traditional way.No try to improve or hav something made on ur own.Ur a good thing for the companies around.U dont create something on ur own.Always look for the thing.
BTW if u did not get that ram sinks find two three old VGAs.Paint them if u like get a double side addhesive sticker and have them fitted on ur rams.that will cost u 10~20 rupees.

[MCLINER]

top speed !

[Anusha]

I dont knw whats wrong with u.Might be the place.Always want the traditional way.No try to improve or hav something made on ur own.Ur a good thing for the companies around.U dont create something on ur own.Always look for the thing.
BTW if u did not get that ram sinks find two three old VGAs.Paint them if u like get a double side addhesive sticker and have them fitted on ur rams.that will cost u 10~20 rupees.
Do whatever you want, but don't paint them. Use fine sandpapers and sand them until they become shiny.

[shanX]

BTW if u did not get that ram sinks find two three old VGAs.Paint them if u like get a double side addhesive sticker and have them fitted on ur rams.that will cost u 10~20 rupees.

Yesterday, talkd with tht guy, He asks me to buy online and get delivered to his address :yes: :)
Btw man I wanted was ramsink coolers?? :confused: If ur talkin abt em, do u want me break old vga's into parts? :confused: No idea @ all


dont knw whats wrong with u.Might be the place.Always want the traditional way.No try to improve or hav something made on ur own.Ur a good thing for the companies around.U dont create something on ur own.Always look for the thing.

:lol: me? Knw wt, I dont like to publish on net much, abt wt I do :yes: , But I place the name shanX in wt I do ;)

And companies are not lucky enough to employ me :yes:

[shanX]

Do whatever you want, but don't paint them. Use fine sandpapers and sand them until they become shiny.
Do you guys mean old ramsinks as ramsink coolers??

[Anusha]

Do you guys mean old ramsinks as ramsink coolers??
Nope. If you can find an old heatsink (maybe a CPU heatsink), you can cut them and make small sinks of the size of RAM chips.

[shanX]

Nope. If you can find an old heatsink (maybe a CPU heatsink), you can cut them and make small sinks of the size of RAM chips.
Yeah hav, thnx! :)

But how to cut.......

[Anusha]

Yeah hav, thnx! :)

But how to cut.......
Ask zCexVe. He's laugh at first, but hopefully help you out :)

[shanX]

Ask zCexVe. He's laugh at first, but hopefully help you out :)
Yeah, am bad this also :lol:

;) And I guess you too. :lol: :lol:


Tht heatsink is attached to a fan smaller than 80mm's, shud strip it out first, coz fan doesnt work :(

[Anusha]

Yeah, am bad this also :lol:

;) And I guess you too. :lol: :lol:


Tht heatsink is attached to a fan smaller than 80mm's, shud strip it out first, coz fan doesnt work :(
What?

[chaminga_d]

Yeah hav, thnx!

But how to cut.......

Have you seen trains... when train comes put that metal thing on the rail... if it going to fall... use your hands and hold it...

[shanX]

What?
*bad @ this also

I meant cutting, pasting, drilling, :lol: stripping ...etc ...etc

[Anusha]

Have you seen trains... when train comes put that metal thing on the rail... if it going to fall... use your hands and hold it...
I'm not worried about cutting the sink. I'm worried about the train :(

[Anusha]

*bad @ this also

I meant cutting, pasting, drilling, :lol: stripping ...etc ...etc
Hehe. Me too :D

[shanX]

Have you seen trains... when train comes put that metal thing on the rail... if it going to fall... use your hands and hold it...
Oh, hav u gone totally mad frm 50% to 100%

[shanX]

I'm not worried about cutting the sink. I'm worried about the train :(
I'm worried abt Chaminga_D :( :( :lol:

[Anusha]

Oh, hav u gone totally made frm 50% to 100%
You mean "MAD"?

[Anusha]

I'm worried abt Chaminga_D :( :( :lol:
You mean you are gonna frame him after the train crash?

[chaminga_d]

Oh, hav u gone totally made frm 50% to 100%

oya ithin 99999999999999999999999999999999999999999999999999 999999999%+ ne

[chaminga_d]

You mean you are gonna frame him after the train crash?

Ayyo ayye... oya danne nedda... heat sinks are made using aluminum... that will crush in small force...

[chaminga_d]

I'm worried abt Chaminga_D

Oya ehenam mamagenath hithanawane...

[chaminga_d]

I'm not worried about cutting the sink. I'm worried about the train

Oya kalabalawenna epa... eakata train department eka innawa....

[shanX]

You mean "MAD"?
Yeah, Yeah mad :lol:


You mean you are gonna frame him after the train crash?
Yeah I'll frame and his funeral will be held with rajya govravaya :lol: He'll b placed, In a inter-cooled and lighted casing :lol:

[shanX]

Oya kalabalawenna epa... eakata train department eka innawa....
Ow deprtmnt eka idee, hebey oyagena nang sure nae :lol:

[zCexVe]

Sorry bro I dont laugh at ppl about the things they dont knw.
Shan use a Hack saw blade.There is a one named speed steel .use that.Too if u can find a handle which can mount the broken up hack-saw blades its great for this.That handle can be found on pavement sellers and will cost 30 rs.But u can have the blade taped or covered with a cloth to have the same result.
http://img460.imageshack.us/img460/5333/hackpe8.jpg

I nthe right hand side one u'll see it has lines.So its easy to cut in the lines.Find a pair of divider or something that has a sharp metal point use a metal ruler or the hack saw blade as the ruler draw a line with hard pushed hands towards the sink.Then u'll find it easy to do it.

[zCexVe]

Anusha ayye oya interest theyak mama thava 5 mins valin vithara talk eke post karanava..

[shanX]

Sorry bro I dont laugh at ppl about the things they dont knw.
Shan use a Hack saw blade.There is a one named speed steel .use that.Too if u can find a handle which can mount the broken up hack-saw blades its great for this.That handle can be found on pavement sellers and will cost 30 rs.But u can have the blade taped or covered with a cloth to have the same result.
http://img460.imageshack.us/img460/5333/hackpe8.jpg

I nthe right hand side one u'll see it has lines.So its easy to cut in the lines.Find a pair of divider or something that has a sharp metal point use a metal ruler or the hack saw blade as the ruler draw a line with hard pushed hands towards the sink.Then u'll find it easy to do it.
Yeah I knw, cud cut with saw blade, but wud the hestsink be shattered to pieces?

[zCexVe]

Shan any help needed?

[shanX]

Anusha ayye oya interest theyak mama thava 5 mins valin vithara talk eke post karanava..
Monavada ape ae??? mama 5 mins walin yanawa :(

[shanX]

Shan any help needed?
No, but thnx. Btw how cud u help?? I'll try to cut em :yes:

[zCexVe]

:lol: me? Knw wt, I dont like to publish on net much, abt wt I do :yes: , But I place the name shanX in wt I do ;)
I did it to make SL ppl aware of these things and to encourage them coz many think it cannot be done.If I wanna show of I hav lots of things like that made by me.I'll post a guide about modifying casings.I have the pics of modification..

[zCexVe]

Yeah I knw, cud cut with saw blade, but wud the hestsink be shattered to pieces?No , I once did.It didnt.

[Anusha]

Ayyo ayye... oya danne nedda... heat sinks are made using aluminum... that will crush in small force...
Not all of them are made of aluminum :rolleyes:

[zCexVe]

Monavada ape ae??? mama 5 mins walin yanawa :(
Oyath eevata kemathi.Dan balannako..

[Anusha]

Anusha ayye oya interest theyak mama thava 5 mins valin vithara talk eke post karanava..
:confused:

[shanX]

Oyath eevata kemathi.Dan balannako..
Came in again

[zCexVe]

Dan balanna