Insanely Big Clock ( 526 LEDs )

[pasanlaksiri]

How is my new big clock. I build this clock for a friend. :D

http://g.imagehost.org/t/0360/DSC03275.jpg (http://g.imagehost.org/view/0360/DSC03275) http://g.imagehost.org/t/0190/DSC03290.jpg (http://g.imagehost.org/view/0190/DSC03290) http://g.imagehost.org/t/0593/DSC03291.jpg (http://g.imagehost.org/view/0593/DSC03291) http://g.imagehost.org/t/0897/DSC03306.jpg (http://g.imagehost.org/view/0897/DSC03306) http://g.imagehost.org/t/0793/DSC03337.jpg (http://g.imagehost.org/view/0793/DSC03337) http://g.imagehost.org/t/0695/DSC03358.jpg (http://g.imagehost.org/view/0695/DSC03358) http://g.imagehost.org/t/0592/DSC03359.jpg (http://g.imagehost.org/view/0592/DSC03359) http://g.imagehost.org/t/0393/DSC03399.jpg (http://g.imagehost.org/view/0393/DSC03399) http://g.imagehost.org/t/0795/DSC03400.jpg (http://g.imagehost.org/view/0795/DSC03400) http://g.imagehost.org/t/0702/DSC03409.jpg (http://g.imagehost.org/view/0702/DSC03409) http://g.imagehost.org/t/0107/DSC03415.jpg (http://g.imagehost.org/view/0107/DSC03415) http://g.imagehost.org/t/0402/DSC03416.jpg (http://g.imagehost.org/view/0402/DSC03416) http://g.imagehost.org/t/0813/DSC03418.jpg (http://g.imagehost.org/view/0813/DSC03418) http://g.imagehost.org/t/0614/DSC03419.jpg (http://g.imagehost.org/view/0614/DSC03419) http://g.imagehost.org/t/0014/DSC03422.jpg (http://g.imagehost.org/view/0014/DSC03422)

Jumbo Clock Video Clip
http://www.youtube.com/watch?v=Dc3zBUu7xgQ

[Renesas]

same math ona pasanlaksiri bro. how got it.

[pasanlaksiri]

same math ona pasanlaksiri bro. how got it.

Appa loku ekak kohe dannada ban.

[Hashan dis]

wow niyami ne elakiri

[djanuradhaxxx]

wow ....great work bro

[djanuradhaxxx]

ubata oka hadanna keeyak giyada??

[pasanlaksiri]

ubata oka hadanna keeyak giyada??

Not sure ban. Matath thiyana pissuwata haduwa. But hadala iwarawenakota matama epa una ban.

[nasri123]

sira Machan.. Hungak welawa giya ethi..

[djanuradhaxxx]

Not sure ban. Matath thiyana pissuwata haduwa. But hadala iwarawenakota matama epa una ban.

keeyak vithara giyada ban???

[ishanka25]

wowee elaaaaa

[pasanlaksiri]

keeyak vithara giyada ban???

That MILK RED LED ekak 2/= wage so 2 X 526/=

Hardware Part ekata 1000/= wage yanna athi.

Amaruma and mata epama una part eka thamai making that housing.

[yasasrd]

maxa

[djanuradhaxxx]

That MILK RED LED ekak 2/= wage so 2 X 526/=

Hardware Part ekata 1000/= wage yanna athi.

Amaruma and mata epama una part eka thamai making that housing.

ow..ithin ubata oka
hadanna giyama epa venna thi......:yes:

[ni_shi2005]

same math ona pasanlaksiri bro. how got it.

he made it machan

[heshan4u]

pattai eeeeeeeeee......................

[kosandpol]

That's a big clock all right.
Does it tell big time too ?
:lol:

[ranndeera]

ela ela elama thama

[pasanlaksiri]

That's a big clock all right.
Does it tell big time too ?
:lol:

:rofl: :rofl:

[dinukamp]

great workk ...maxxa

[cmanimations]

ElaKiri
watinaama dee uba aka hadala ewara kalaneee....

[3KSMIP]

kohomada machan meka hadanne.circuit diagram eka denna puluwanda.

[chuti malli]

maxaa machang. uba maara weda karayek ne. Machang hadanna puluwan nam tawa baduwak tiyenawa. Puluwan nam try ekak diyan...

A Radar Detector........

car ekata..... high speed yanakota policeyen berenna:lol::lol::lol:;)

[pasanlaksiri]

maxaa machang. uba maara weda karayek ne. Machang hadanna puluwan nam tawa baduwak tiyenawa. Puluwan nam try ekak diyan...

A Radar Detector........

car ekata..... high speed yanakota policeyen berenna:lol::lol::lol:;)

Machan Speed Test karanne Laser wage use karala. So it cant be detect. Only way is detect their Walkie-talkie signals. Every Traffic guy hv a Walkie-talkie.

[3KSMIP]

kohomada machan meka hadanne.circuit diagram eka denna puluwanda.

[pasanlaksiri]

kohomada machan meka hadanne.circuit diagram eka denna puluwanda.


Ane sorry ban i cant just give it to you machan.

[Knight_Black]

ela ela

[[email protected]]

great work bro

[thimal3000]

sira machan. hongak mahansi wela thiyanawa wage

[pasanlaksiri]

sira machan. hongak mahansi wela thiyanawa wage

Anthimata matama epa una ban:lol:

[krish69]

y only photoes n videos showing...?

y dont u give circuit and assembler codes to make these things..?if u share it others can builds these n enjoy...dont u like that..

[pasanlaksiri]

y only photoes n videos showing...?

y dont u give circuit and assembler codes to make these things..?if u share it others can builds these n enjoy...dont u like that..

Nope

[chint]

Maru..:D
thawa 3k hadala clock tower 1kma gahapan:P

[pasanlaksiri]

Maru..:D
thawa 3k hadala clock tower 1kma gahapan:P

He hee. Yes in future.

[3KSMIP]

ane macho mata circuit diagram denna puluwanda.plssssssssssss

[pasanlaksiri]

ane macho mata circuit diagram denna puluwanda.plssssssssssss

Machan the thing is circuit is totally controled by microcontroller.So its need to be programed. Ane sorry i just cant give it away.

[harintheman]

elakiri macho great work keep it up

[rajapitiya]

machan puluvannam Circuit diagrms tika diyanko..loku udauvak..PLZ

[krish69]

machan puluvannam Circuit diagrms tika diyanko..loku udauvak..PLZ


ekaa denne ne ban..u thaniyama budu wenna hadanawa...ape anik ewun great kiyakiya uwa chun karanawa.mama lebunoth me thread ekema daannam..lankawe microprosser programme karanna danne u witharai kiyala hithan inne..

sorry to say ..its called SELFISH..

[krish69]

macho Rajapitiya,

check this link

http://www.josepino.com/?anp-1224hr-led-clock1

u will find details about making a digital clock...

if any help need put it in this thread..

[Zeus]

Just like the clock in with traffic light I guess :)
Great work pal :D

[krish69]

menna thawa simple ekak..

http://www.josepino.com/?led_clock

u can find free hex codes n programmer circuits in that web site..pls check

[pasanlaksiri]

ekaa denne ne ban..u thaniyama budu wenna hadanawa...ape anik ewun great kiyakiya uwa chun karanawa.mama lebunoth me thread ekema daannam..lankawe microprosser programme karanna danne u witharai kiyala hithan inne..

sorry to say ..its called SELFISH..

* lankawe microprosser programme

Do you know the difference between microprocessor & micro controllers ?

Im using micro controllers not microprocessors. But I like to try microprocessors in future.

* danne u witharai kiyala hithan inne..

Uba danna tharama thamai ithin. SL wala oona tharam patta sira wada karayo innawa. I also know a guy that using Rabbit microprocessors.

* lebunoth me thread ekema daannam..

Plz post

Mama amaruwen liyala ewa uba free illanawa nam its not fair.

[blackroses]

hey palana.......

umbe weda sira..........



email eka poddak mata PM karapan.......

may be tawa tika dawasakin umba wage dial ekak mata oni wei...........




niyamai machan.......

keep it uppp........

[pasanlaksiri]

ekaa denne ne ban..u thaniyama budu wenna hadanawa...ape anik ewun great kiyakiya uwa chun karanawa.mama lebunoth me thread ekema daannam..lankawe microprosser programme karanna danne u witharai kiyala hithan inne..

sorry to say ..its called SELFISH..

I THINK U HV NO IDEA ABOUT HOW HARD IT IS TO WRITE PERFECTLY RUNNING PROGRAM AND HARDWARE. COZ IF U KNOW, U WILL ALSO NEVER GIVE AWAY UR CODES.

[krish69]

here is a nother one to make big digit

http://www.kmitl.ac.th/~kswichit/Led/Led.html

circuit pdf file...

http://www.kmitl.ac.th/~kswichit/Led/schematic.pdf

[pasanlaksiri]

here is a nother one

http://www.kmitl.ac.th/~kswichit/Led/Led.html

Ha ha ha hey stupid Read b4 u post.

That is just SPI SSD Interface. That u can use for any thing with low pin count.

[krish69]

* lankawe microprosser programme

Do you know the difference between microprocessor & micro controllers ?

Im using micro controllers not microprocessors. But I like to try microprocessors in future.

* danne u witharai kiyala hithan inne..

Uba danna tharama thamai ithin. SL wala oona tharam patta sira wada karayo innawa. I also know a guy that using Rabbit microprocessors.

* lebunoth me thread ekema daannam..

Plz post

Mama amaruwen liyala ewa uba free illanawa nam its not fair.

OK..u r arguing about Prosser/controller..?ok my typing mistake..it shuld be controller..

i hav monitered ur post for a long time..u learned from other sites like austec/electrotec...i saw ur behaviour there...

if u r a programmer writer good..i appreciate it .but the bad part is u show them what u make but not giving others to make any info..so useless.. no one get any just enjoying pictures u post..
tell the truth i am not a programmer..i got internet i can find lots of circuits or projects for pic ic like 16F84a/16F877 then i can modify the codes n change the parameters..
i like to SHARE what i got n happy when others learn those things..
as u know all hardware n ic's can buy at petta sri lanka..
so shall we give chance to others to do these projects..
i know its hard..but some one interested y don't we give him a chance.???

we all born free of hand and dying free of hand..right..cant take any..so better we give those to others b4 we die..everything developed because it shared..if hidden..???what wil happen..

no hard feelings pasan...tc

[krish69]

Ha ha ha hey stupid Read b4 u post.

That is just SPI SSD Interface. That u can use for any thing with low pin count.

ok i am a stupid but u .......?

every one can c it a part to use in a circuit ..it clearly given in the page..so no need to complain..any one can make a big digit help of this diagram,,,

[krish69]

this is hard to make but all circuit is in this web page ..try..

http://uk.geocities.com/[email protected]/clock_electronic_1a.htm

[krish69]

Big PIC Clock circuit.......

http://www.electronics123.net/amazon/datasheet/k73.pdf

circuit diagram......

http://www.electronics123.net/amazon/datasheet/k73sch.pdf

codes for the project....

http://www.electronics123.net/amazon/software/clocksrus.zip


n joy

[Virtual Hacker<><>]

ubanam mara ekek.oke sell karanwanam kiyapan!

[pasanlaksiri]

OK..u r arguing about Prosser/controller..?ok my typing mistake..it shuld be controller..

i hav monitered ur post for a long time..u learned from other sites like austec/electrotec...i saw ur behaviour there...

if u r a programmer writer good..i appreciate it .but the bad part is u show them what u make but not giving others to make any info..so useless.. no one get any just enjoying pictures u post..
tell the truth i am not a programmer..i got internet i can find lots of circuits or projects for pic ic like 16F84a/16F877 then i can modify the codes n change the parameters..
i like to SHARE what i got n happy when others learn those things..
as u know all hardware n ic's can buy at petta sri lanka..
so shall we give chance to others to do these projects..
i know its hard..but some one interested y don't we give him a chance.???

we all born free of hand and dying free of hand..right..cant take any..so better we give those to others b4 we die..everything developed because it shared..if hidden..???what wil happen..

no hard feelings pasan...tc

Yes I agreed. Tons of free simple projects can find from the internet. Like clocks, LED Stuff etc. But machan people never share hard stuff. Like Controlling AC, 3 phase motor controlling etc. Share or Not share that is totally personal. If ur like to share plz do. Yes im a member of lots of site. And few years back i also asked lots of stupid questions. And I didn't get any good feed backs then. But now I know y.

AND IM NOT SHARING. COZ IF SOME ONE NEED TO FIND SOME THING PRETTY BADLY HE OR SHE WILL ACHIEVE IT ANY HOW. NO ONE HELPED ME WHEN I START LEARNING. WHY OTHERS CANT TRY AT THEIR BEST.

[krish69]

Yes I agreed. Tons of free simple projects can find from the internet. Like clocks, LED Stuff etc. But machan people never share hard stuff. Like Controlling AC, 3 phase motor controlling etc. Share or Not share that is totally personal. If ur like to share plz do. Yes im a member of lots of site. And few years back i also asked lots of stupid questions. And I didn't get any good feed backs then. But now I know y.

AND IM NOT SHARING. COZ IF SOME ONE NEED TO FIND SOME THING PRETTY BADLY HE OR SHE WILL ACHIEVE IT ANY HOW. NO ONE HELPED ME WHEN I START LEARNING. WHY OTHERS CANT TRY AT THEIR BEST.

yes pasan..i face the same..no one to help..i started same during past without internet..but i thought to do the reverse..by helping to unknown like me in the past..if we put to same catalogery by hiding thins they too think about us same as we blame during past..
ok actually i saw ur post in that sites about proublems u face..any way i not going to argue about ur policy not shairing the things u learned/achive,,
but i felt sad in this elakiri forum that every one is sharing every thing they have..like songs/non stop/pictures/soft..all are sharing.but u only show what u build and not giving any thing..c in ur threads lots of members asking begging circuit diagrams but u not give them even a hint..so i feel their way,as they feel..they ask but not received anything.
so better u put "DON'T ASK CIRCUIT or SOFTWARE" with ur avatar...
so i think u can understand y im said like that..
u got mad on my post..bt don't think im an enemy..ok..il happy what u learned n did with micro controllers as a srilankan..
no hard feelings

tc pasan..

[pasanlaksiri]

yes pasan..i face the same..no one to help..i started same during past without internet..but i thought to do the reverse..by helping to unknown like me in the past..if we put to same catalogery by hiding thins they too think about us same as we blame during past..
ok actually i saw ur post in that sites about proublems u face..any way i not going to argue about ur policy not shairing the things u learned/achive,,
but i felt sad in this elakiri forum that every one is sharing every thing they have..like songs/non stop/pictures/soft..all are sharing.but u only show what u build and not giving any thing..c in ur threads lots of members asking begging circuit diagrams but u not give them even a hint..so i feel their way,as they feel..they ask but not received anything.
so better u put "DON'T ASK CIRCUIT or SOFTWARE" with ur avatar...
so i think u can understand y im said like that..
u got mad on my post..bt don't think im an enemy..ok..il happy what u learned n did with micro controllers as a srilankan..
no hard feelings

tc pasan..

Machan if i post source codes, some of them will try it and enjoy it. But some of them will resell it as its their own code. For that I dont like. Thats what happend normally in SL.

[madurax86]

Nice work, and about sharing...you have to have a limit on that i think coders specially go thru a lot of shit to bring up totally bug less programs its same for electronics too. Its good to share but most of people in this world just dont get the concepts they just want to get some money outta everything no matter it is their original work or not so sharing everything you do is not that good. Thats what I think :P

[krish69]

Machan if i post source codes, some of them will try it and enjoy it. But some of them will resell it as its their own code. For that I dont like. Thats what happend normally in SL.

yes true all gone with money..u know in pettah the "budu res walalla"how much cost n senith project with no no on ic and "code protected"on that PIC ic..
so seems u r a business man now..haaa....good...
but pasan i dont like this way..i like to share what i leaned..hope even a simple project to a beginner gives l lat satisfaction n happy..he will develops to a great programmer from it..
give little to others to develop..i don't think it wont harm to ur business or image..am i correct..?
thanks

tc

[pasanlaksiri]

yes true all gone with money..u know in pettah the "budu res walalla"how much cost n senith project with no no on ic and "code protected"on that PIC ic..
so seems u r a business man now..haaa....good...
but pasan i dont like this way..i like to share what i leaned..hope even a simple project to a beginner gives l lat satisfaction n happy..he will develops to a great programmer from it..
give little to others to develop..i don't think it wont harm to ur business or image..am i correct..?
thanks

tc

Yes agreed. But machan if some one really need to learn. There r tons of tons of projects, magz, books, forums r availabel freely on the web. B4 some one ask plz help. He must do the homework first.

[corei7]

fatta...

[jkadithya]

elakiri macho

[krish69]

Yes agreed. But machan if some one really need to learn. There r tons of tons of projects, magz, books, forums r availabel freely on the web. B4 some one ask plz help. He must do the homework first.

yes,,i agree with u..if thereis no interest cant go a long way in any subject...but some r in a way to learn,no one to show the way..hope u will guide them to come to a place as u in today,they r in gungle,,show thw way to road..b happy u did good things for them..
i know they wont foget "Pasanlaksiri" as their MASTER...

tc