E220-Client software Updated on 2009-6-12

[prasadana2]

E220 E220-Client software UTPSB300D05SP00C03 (UTPS11.300.05.00.03)



re-uploaded to rapid share..

Download (http://rapidshare.com/files/263898543/downloadCenter.do_method_downloadFile_flay_softwar e_fileName_31887_attachmentName_E220-Client_softwa)

after downloading the file rename it to E220.zip and unzip it.. :)


downloaded and uploaded from..
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=doListSoftware#


for old firmwares go to
http://www.huawei.com/mobileweb/en/doc/list.do?type=-1&id=736

[tharindu_kandage]

I already got early dialog's update. hope this works. Thank you.

[prasadana2]

Here is the latest firmware available (11.117.10.03.99)
http://rapidshare.de/files/47569770/E220_11.117.10.03.99_Firmware.exe.html
& the latest dashboard "Mobile Partner" available (UTPS11.030.01.03.297)
http://rapidshare.de/files/47569676/UTPS11.030.01.03.297_MAC11.202.08.01.297.exe.html


1. Make sure you have your PC and modem turned off for a while, because usually the modem gets hot if you use it, so let it cool well before you start the update.
2. Take the SIM card out of the modem, then start the PC.
3. Start the 3 connection manager, it will complain that there is no SIM, and the “Connect” button will be greyed. Close theconnection manager window – CLOSE, do NOT just minimize. It will pop up with a messa ge whether you really want to close it, click yes.
4. Start the firmware update program and follow the instructions.
5. Wait a minute before you press “Finish” when the updating ends.
6. Turn off the PC. Insert the SIM card back in the modem.
7. Do not forget to insert the SIM card in the modem !
8. Start the PC. The version of the firmware listed in the connection manager window should say 11.117.10.03.99

[prasadana2]

Here is the latest firmware available (11.117.10.03.99)
http://rapidshare.de/files/47569770/E220_11.117.10.03.99_Firmware.exe.html
& the latest dashboard "Mobile Partner" available (UTPS11.030.01.03.297)
http://rapidshare.de/files/47569676/UTPS11.030.01.03.297_MAC11.202.08.01.297.exe.html


1. Make sure you have your PC and modem turned off for a while, because usually the modem gets hot if you use it, so let it cool well before you start the update.
2. Take the SIM card out of the modem, then start the PC.
3. Start the 3 connection manager, it will complain that there is no SIM, and the “Connect” button will be greyed. Close theconnection manager window – CLOSE, do NOT just minimize. It will pop up with a messa ge whether you really want to close it, click yes.
4. Start the firmware update program and follow the instructions.
5. Wait a minute before you press “Finish” when the updating ends.
6. Turn off the PC. Insert the SIM card back in the modem.
7. Do not forget to insert the SIM card in the modem !
8. Start the PC. The version of the firmware listed in the connection manager window should say 11.117.10.03.99

[tharindu_kandage]

thats cool.