INTEL P4 630.Help me????

[gayannr]

mage intel pentium4 processor number eka 630 .wada karaddi 72C ta :sorry: :sorry: :shocked: :shocked: wada rath wenawa oyalath innawada meka use karana aya oyalataht mehema wenawada ane PLS help me?? mekata mokada karanne mage intel fan ekai heatsink ekai thiyenne fan eke pethi 7k thiyenawa pethi adu wuanaama cool wenawa wadida?? ASUS cooler ekak dammoth hondaida awulak nadda.PLS HELP ME????

[gayannr]

pls help me on this topic.i may be end up with a blown PROCESSOR

[gayannr]

Anybody help me PLS

[gayannr]

ane mekata help karannakaoooooooo

[blood_brotha]

72?

[blood_brotha]

80 pennoth upset. umba thermal paste daalad? tiyenney?

[blood_brotha]

nethnam fan eka upset gihilla ati. fan ekath hodata weda karanawanam. proc eka maaru karanda. ekath beri nam aftermarket cooler ekak fix karanda

eg-zalman

[BlackNight]

Clean the heat sink if it is covered with dust.......

[mlakmal]

best thin to do is check ur processor with othr cooler if the temp goes down or nt ... den replace it

[Anusha]

Reseat the heat sink and see. Maybe the heatsink is covered with dust, and blocking heat dissipation from the heatsink fins.

What about the ventilation inside the case? Maybe the ambient temperature is too high.

[guluwita]

1. Do not use third party cooling fans or thermal paste with original Intel Processors. :angry:

2. Do not wipe-off the original thermal paste of the intel heat sink. :angry:

3. 68 C - 72 C is ok with intel processor. :yes:

4. Do not change original BIOS settings if you're using an original Intel motherboard :angry:

[gayannr]

heatsink is fine i'm not letting dust go inside cpu.it's clear heat paste eka original apu ekamai habai mehema wadak wuna board eke awulak gihin okkoma genihin maaru kalaa ethakota aluth heatsink/fan daala thibuna.aftermarket coolers use karana kenek nadda hodada ahaganna.system temperature tikak wadiyen thibuna fast RPM fan ekak damma.system heat eka 30C kata withara bassa.mokada karanne 3rd party coolers awulak nadda

[Anusha]

1. Do not use third party cooling fans or thermal paste with original Intel Processors. :angry:

2. Do not wipe-off the original thermal paste of the intel heat sink. :angry:

3. 68 C - 72 C is ok with intel processor. :yes:

4. Do not change original BIOS settings if you're using an original Intel motherboard :angry:
:lol: :lol: :lol: :lol:

1. You should only use Intel HFS if you are NOT overclocking. Intel HSF is the most basic HSF for an Intel CPU.

2. True. But it's not a paste. It's a pad. It's less efficient that a paste.

3. Not true. Every CPU has to be less than 60C at full load. Those fans are designed for a 10C less ambient temperature (20C against 30C) so that will work well only at that ambient temperature. For SL, these are not adequate at all.

4. Why not? :confused:

[Anusha]

heatsink is fine i'm not letting dust go inside cpu.it's clear heat paste eka original apu ekamai habai mehema wadak wuna board eke awulak gihin okkoma genihin maaru kalaa ethakota aluth heatsink/fan daala thibuna.aftermarket coolers use karana kenek nadda hodada ahaganna.system temperature tikak wadiyen thibuna fast RPM fan ekak damma.system heat eka 30C kata withara bassa.mokada karanne 3rd party coolers awulak nadda
3rd party coolers are good, but check out reviews before you buy any. They may look great, but not works as well as you think.

[gayannr]

TOMSHARDWARE.com eken kiyanawa 3rd party coolers intel proc walata use karanna epa kiyala but asus coolers may not be bad as a choice for cooling isn't it?

[Anusha]

TOMSHARDWARE.com eken kiyanawa 3rd party coolers intel proc walata use karanna epa kiyala but asus coolers may not be bad as a choice for cooling isn't it?
To be honest, ASUS are too new to the cooling market. I guess you should thoroughly check out the reviews before you go with any ASUS coolers.

[Anusha]

Check this out.
Asus Star Ice cooler: http://www.driverheaven.net/reviews/asusicecooler/
Scroll down and you will see a chart (AMD as well as Intel).

[gayannr]

thanks macho i'l chek that.PLS keep in touch

[Anusha]

thanks macho i'l chek that.PLS keep in touch
But remember, there are much better cooling solutions from other companies. But we can't find them in SL :(

However, 3rd party coolers has to be better than Intel's boxed coolers because otherwise how are they gonna sell them? Intel's coolers are free ne :D

[gayannr]

thats the problem,gigabyte coolers are here no,but i ve seen @ pchouse it is over 10000SLR

[lasanka]

hey im usin a pentium 4 524+ ... af far as i knw i think it has to be a prob with the heat sink... sorry but thats the most possible problem!

[Anusha]

thats the problem,gigabyte coolers are here no,but i ve seen @ pchouse it is over 10000SLR
Well, Gigabyte is not known well for their coolers either. Same as Asus.

Companies like Coolermaster, Thermaltake, Thermalright, Zalmaan etc. are the best in the business.

[amila325]

yeah first clean it then go to bios and see where wht is the fan speed and other things

[Anusha]

hey im usin a pentium 4 524+ ... af far as i knw i think it has to be a prob with the heat sink... sorry but thats the most possible problem!
P4 630 has more cache, faster FSB etc. So it is supposed to get hotter.

[gayannr]

3rd party coolers use karana kenek nadda wisthra ahaganna?

[Anusha]

3rd party coolers use karana kenek nadda wisthra ahaganna?
I'm using the boxed cooler at the moment. I will buy one if I buy a new motherboard (for overclocking ;))

[lasanka]

P4 630 has more cache, faster FSB etc. So it is supposed to get hotter.
oh really sorry i didnt knw abt that... !

[gayannr]

u've got the same proc as i got?

[gayannr]

I coudnt find something that can really help me with this PLS HELP me

[chaminga_d]

Don't look at this as a Serious Problem... This is how Intel processors act.... I use P4 3.2 HT Prescott (540) Processor with Original CPU Fan... It gets its heat upto 80C with out any Problem.. (But heat reduces the speed)

You are Using Intel® Pentium® 4 Processor 630 (3 GHz, 2 MB Cache, LGA775, HT)... Its Thermal Specification is about 70C. But Heat is depending on system stress...

If you looking to reduce processor heat use Good CPU Cooler with good Terminal Grease... Also be careful to make good air circulation inside Casing...

[geethq]

:lol: :lol: :lol: :lol:

1. You should only use Intel HFS if you are NOT overclocking. Intel HSF is the most basic HSF for an Intel CPU.

2. True. But it's not a paste. It's a pad. It's less efficient that a paste.

3. Not true. Every CPU has to be less than 60C at full load. Those fans are designed for a 10C less ambient temperature (20C against 30C) so that will work well only at that ambient temperature. For SL, these are not adequate at all.

4. Why not? :confused:
Mooo dannawa wadiy!!:angry: :angry: :angry: :angry:

[dpg]

Don't look at this as a Serious Problem... This is how Intel processors act.... I use P4 3.2 HT Prescott (540) Processor with Original CPU Fan... It gets its heat upto 80C with out any Problem.. (But heat reduces the speed)

You are Using IntelŪ PentiumŪ 4 Processor 630 (3 GHz, 2 MB Cache, LGA775, HT)... Its Thermal Specification is about 70C. But Heat is depending on system stress...

If you looking to reduce processor heat use Good CPU Cooler with good Terminal Grease... Also be careful to make good air circulation inside Casing...

Its not 70C. (Around 67C)

[dpg]

Just turn off the Fan Speed Control. (In bios)

It'll help a lil bit. ;)

[Anusha]

Mooo dannawa wadiy!!:angry: :angry: :angry: :angry:
WTH is wrong with you Nangi?

[dpg]

WTH is wrong with you Nangi?

:lol: :rofl: :lol: :rofl: :lol: :rofl: :lol: :rofl: :lol: :rofl:

[Djpata]

WTH is wrong with you Nangi?
:lol: :lol: :lol: lolzzzzzzzzz:lol: :lol: :lol: nangi nemei ban gon nangi lolzzzzzzzz:lol: :lol:

[Michael]

WTH is wrong with you Nangi?

Ela Kindiyaa :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

[geethq]

WTH is wrong with you Nangi?
mama ithin oyaata mukuth kiyanne naa!!
Tharaha unoth unaamane!!!:yes: :yes: :yes: :angry: :angry:
Anu mage torrent wade kohomada?

[GNS]

in ma PC, CPU Fan works on it's own choice...

some times works, some time not...

Bt I don't care...:lol: