gazaly
04-02-2007, 10:53 AM
I found the process extremely helpful, im currently using the patch and its giving me the speeds i never had b4
Step 1 :
If you’re on XP sp2, your TCP connections are limited to a maximum of 10. This seriously hurts your downloading speed because it wont let you connect to a high amount of ip numbers. It is supposed to slow down viruses because their spreading strategy is to connect to a high amount of ip numbers, but it also cripples your torrent downloads.
A nice way to fix this is to download this patch, it allows you to set the maximum allowed connections to any number you want. Any number between 50 and 100 is ok (more is NOT always better).
http://lvllord.de/?lang=en&url=downloads { PATCH }
2. Configure your torrent client to allow 50-100 max half-open TCP connections
µTorrent: Options > Preferences > Advanced options > net.max_halfopen
Bitcomet: Options > Preferences > Connection > max half-open TCP
Now you’re ready to go…
A third point of interest is that some “windows updates” revert your tweaked tcp connections back to 10. So it’s wise to check this every now and then. You can check this by going to (in windows xp) Start > Control Panel > Administrative Tools > Event Viewer > System… Look for event 4226 (sort by event).
If there are a lot of daily occurences it’s likely that the max amount of half-open tcp connections was set back to 10. Or you’re infected with some nasty spyware…
For Azures :. Tools > Options > Connections > Max Simultaneos outbound connection attempts ( set it max to 50 in the box )
Step 2 :
The next step in the tweaking process is to get all of the software that is needed. The main software program that you will use is called CableNut, which is developed by CableNut Software and is available for free at www.cablenut.com. CableNut is a great program that allows users to edit their Internet settings easily. Visit their Web page and download and install the latest copy.
Calculating settings for CableNut
Once you have downloaded CableNut, you are ready to start getting information to use with the program. The first value that you will need to calculate is the latency of your connection when it is active. To do this, you will use the trace route command built into Windows XP. Follow these steps to get the latency value to use for your connection:
1. First, open up a Command Prompt window. This can be done by clicking the Start Menu and selecting Run. Then type cmd in the text box and click the OK button.
2. Once Command Prompt is loaded, you are ready for the next part. Because you will need to test your connection when it is active, you will need to find something large to download that will run the duration of the test, which will be approximately 30 seconds. I recommend that you head over to www.microsoft.com/downloads and find some huge file, such as the .NET SDK framework, which is over 100,000 KBs. For the test, you want a file big enough so it will be downloading throughout the whole test. Those of you on a dialup connection can pick a much smaller file than those on a high-speed connection.
3. Once you have your download test file picked out, start the download and switch back to the Command Prompt window. In that window, type ( tracert www.tweakxp.com. ) During the test, you will see many times displayed in milliseconds. After the test finishes, pick the highest time, as shown in Figure 11-12. This is the number that you will use as your latency. Also, feel free to cancel the download after the test is finished.
Entering the latency value into CableNut
Now that you have the latency value calculated, you are ready to enter this information into a great online CableNut settings calculator written by Joe Zeiler, who is one of the talented moderators at the TweakXP.com support forums. Open up your Web browser and visit www.j79zlr.com/cablenutXP2k.php (the URL is case-sensitive!), then follow these steps to get the values to enter into CableNut:
1. Once you have opened up the site, the first part of using the settings calculator is to select your connection type from the drop-down box.
2. Next, you will have to do a little research and find out exactly what your upload and download speeds should be for your Internet connection. I had to contact Comcast, my ISP, to find out the exact values, because the values are not always advertised. Once, you get those values, make sure that they are in kilobits per second and not kilobytes per second (KB= kilobytes; Kb= kilobits), then enter them in the corresponding text boxes on the Web page.
http://common.ziffdavisinternet.com/util_get_image/9/0,1425,i=91276,00.jpg
3. Enter the latency value that you calculated earlier into the latency text box on the Web page and then click the Calculate button.
4. After you hit the Compute Settings button, scroll down and you will see the values that were calculated. Now, you are almost done. Continue scrolling down until you see a button labeled CCS File Generator under the Cablenut setting files section. Click that button and a new window will pop up with some text in it. Make sure that you have any pop-up blockers disabled when you are using the calculator.
5. Use the mouse and select all of the text and numbers that are displayed in the pop-up window. Right-click the mouse and select copy to copy all of the text on the page to the clipboard.
6. Now open up Notepad from the Accessories folder. In the blank Notepad window, paste the contents of the clipboard by right-clicking the white background and selecting Paste.
7. Once Notepad is displaying the information that you copied from the pop-up window, all that is left is to save the file in the CableNut format. To do this, click the File menu bar item and select Save As. Then in the Save As Type drop-down box, select All Files. Key in myCableNutSettings.ccs in the file name text box. Specify the Save location, such as the desktop, and click the Save button.
You are now finished with the calculations that will optimize your Internet connection. That wasn't too hard now, was it?
Using CableNut to adjust settings
Now that you have created your CableNut settings file, or will be using the 56K settings file, you are ready to start using CableNut. Follow these steps to import the new optimized settings into your system:
1. Start up the CableNut application by opening the Start Menu and browsing to the CableNut folder and selecting the adjuster application.
2. When CableNut has loaded, click the File menu bar item and select Open Custom Settings File. Navigate to where you saved your settings file, or if you are a 56K user, use the file that is on the companion CD, called 56K_CableNut.ccs, and then click the Open button.
3. Now you will see the information boxes for all of the different parameters filled with your connection-specific information, as shown in Figure 11-13. The last step is to click the Save to Registry button and you are finished. After you click the Save button, reboot, and your new settings will be in effect.
Good Luck And enjoy with maxx speeds ur connection has to offer....
FORGOT TO TELL YA WHEN YOU RUN THE PATCH KEEP ON SAYING YES AND FINALLY IT WILL ASK FOR THE XP CD JUST HIT CANCEL ON THAT AND ALL SHOULD BE FINE
Step 1 :
If you’re on XP sp2, your TCP connections are limited to a maximum of 10. This seriously hurts your downloading speed because it wont let you connect to a high amount of ip numbers. It is supposed to slow down viruses because their spreading strategy is to connect to a high amount of ip numbers, but it also cripples your torrent downloads.
A nice way to fix this is to download this patch, it allows you to set the maximum allowed connections to any number you want. Any number between 50 and 100 is ok (more is NOT always better).
http://lvllord.de/?lang=en&url=downloads { PATCH }
2. Configure your torrent client to allow 50-100 max half-open TCP connections
µTorrent: Options > Preferences > Advanced options > net.max_halfopen
Bitcomet: Options > Preferences > Connection > max half-open TCP
Now you’re ready to go…
A third point of interest is that some “windows updates” revert your tweaked tcp connections back to 10. So it’s wise to check this every now and then. You can check this by going to (in windows xp) Start > Control Panel > Administrative Tools > Event Viewer > System… Look for event 4226 (sort by event).
If there are a lot of daily occurences it’s likely that the max amount of half-open tcp connections was set back to 10. Or you’re infected with some nasty spyware…
For Azures :. Tools > Options > Connections > Max Simultaneos outbound connection attempts ( set it max to 50 in the box )
Step 2 :
The next step in the tweaking process is to get all of the software that is needed. The main software program that you will use is called CableNut, which is developed by CableNut Software and is available for free at www.cablenut.com. CableNut is a great program that allows users to edit their Internet settings easily. Visit their Web page and download and install the latest copy.
Calculating settings for CableNut
Once you have downloaded CableNut, you are ready to start getting information to use with the program. The first value that you will need to calculate is the latency of your connection when it is active. To do this, you will use the trace route command built into Windows XP. Follow these steps to get the latency value to use for your connection:
1. First, open up a Command Prompt window. This can be done by clicking the Start Menu and selecting Run. Then type cmd in the text box and click the OK button.
2. Once Command Prompt is loaded, you are ready for the next part. Because you will need to test your connection when it is active, you will need to find something large to download that will run the duration of the test, which will be approximately 30 seconds. I recommend that you head over to www.microsoft.com/downloads and find some huge file, such as the .NET SDK framework, which is over 100,000 KBs. For the test, you want a file big enough so it will be downloading throughout the whole test. Those of you on a dialup connection can pick a much smaller file than those on a high-speed connection.
3. Once you have your download test file picked out, start the download and switch back to the Command Prompt window. In that window, type ( tracert www.tweakxp.com. ) During the test, you will see many times displayed in milliseconds. After the test finishes, pick the highest time, as shown in Figure 11-12. This is the number that you will use as your latency. Also, feel free to cancel the download after the test is finished.
Entering the latency value into CableNut
Now that you have the latency value calculated, you are ready to enter this information into a great online CableNut settings calculator written by Joe Zeiler, who is one of the talented moderators at the TweakXP.com support forums. Open up your Web browser and visit www.j79zlr.com/cablenutXP2k.php (the URL is case-sensitive!), then follow these steps to get the values to enter into CableNut:
1. Once you have opened up the site, the first part of using the settings calculator is to select your connection type from the drop-down box.
2. Next, you will have to do a little research and find out exactly what your upload and download speeds should be for your Internet connection. I had to contact Comcast, my ISP, to find out the exact values, because the values are not always advertised. Once, you get those values, make sure that they are in kilobits per second and not kilobytes per second (KB= kilobytes; Kb= kilobits), then enter them in the corresponding text boxes on the Web page.
http://common.ziffdavisinternet.com/util_get_image/9/0,1425,i=91276,00.jpg
3. Enter the latency value that you calculated earlier into the latency text box on the Web page and then click the Calculate button.
4. After you hit the Compute Settings button, scroll down and you will see the values that were calculated. Now, you are almost done. Continue scrolling down until you see a button labeled CCS File Generator under the Cablenut setting files section. Click that button and a new window will pop up with some text in it. Make sure that you have any pop-up blockers disabled when you are using the calculator.
5. Use the mouse and select all of the text and numbers that are displayed in the pop-up window. Right-click the mouse and select copy to copy all of the text on the page to the clipboard.
6. Now open up Notepad from the Accessories folder. In the blank Notepad window, paste the contents of the clipboard by right-clicking the white background and selecting Paste.
7. Once Notepad is displaying the information that you copied from the pop-up window, all that is left is to save the file in the CableNut format. To do this, click the File menu bar item and select Save As. Then in the Save As Type drop-down box, select All Files. Key in myCableNutSettings.ccs in the file name text box. Specify the Save location, such as the desktop, and click the Save button.
You are now finished with the calculations that will optimize your Internet connection. That wasn't too hard now, was it?
Using CableNut to adjust settings
Now that you have created your CableNut settings file, or will be using the 56K settings file, you are ready to start using CableNut. Follow these steps to import the new optimized settings into your system:
1. Start up the CableNut application by opening the Start Menu and browsing to the CableNut folder and selecting the adjuster application.
2. When CableNut has loaded, click the File menu bar item and select Open Custom Settings File. Navigate to where you saved your settings file, or if you are a 56K user, use the file that is on the companion CD, called 56K_CableNut.ccs, and then click the Open button.
3. Now you will see the information boxes for all of the different parameters filled with your connection-specific information, as shown in Figure 11-13. The last step is to click the Save to Registry button and you are finished. After you click the Save button, reboot, and your new settings will be in effect.
Good Luck And enjoy with maxx speeds ur connection has to offer....
FORGOT TO TELL YA WHEN YOU RUN THE PATCH KEEP ON SAYING YES AND FINALLY IT WILL ASK FOR THE XP CD JUST HIT CANCEL ON THAT AND ALL SHOULD BE FINE