PDA

View Full Version : USB 2.0


gazaly
05-02-2007, 06:22 PM
Both the Firewire and the USB allow you to easily install external peripherals to the computer, such as digital cameras, keyboards, mouse, printers, Zip-drives, CD recorders, hard disks etc, through a standardized connector available in the computer's motherboard (in the case of USB) or through an extra board added to the computer (in the case of the FireWire, if you don't have a high-end motherboard with this kind of bus).

Firewire (also known as IEEE 1394) is an external bus to connect external peripherals to the computer, similar to USB, which has as great attractive a high transfer rate: 400 Mbps (that is approximately 50 MB/s).

The USB Implementers Forum (http://www.usb.org), that is the group of manufacturers that developed the USB, has already developed the USB second version, called USB 2.0 or High-speed USB. This new USB version has a maximum transfer rate of 480 Mbps (approximately 60 MB/s), that is, a higher rate than the FireWire and much higher than its previous version (called 1.1), that is the version we have today in our computers and that allows the connection of peripherals using transfer rates of 12 Mbps (approximately 1.5 MB/s) or 1.5 Mbps (approximately 192 KB/s), depending on the peripheral.

The great problem of the USB was its transfer rate. Just remember that most hard disks available nowadays on the market work at a rate of 66 MB/s. As the USB used at present only transfers 1,5 MB/s, an external hard disk connected to the computer through USB is extremely slow. For more common applications - such as printers, scanners and video cameras - the USB transfer rate is satisfactory. The real problem is the connection of peripherals that demand high transfer rates, basically data storage systems, such as hard disks, CD recorders and Zip-drives.

The USB 2.0 port continues 100% compatible to USB 1.1 peripherals. When initializing the communication with a peripheral, the port tries to communicate at 480 Mbps. If it does not succeed, it lowers its speed to 12 Mbps. If the communication is still not established, the speed is then lowered to 1,5 Mbps. So, the users should not worry about the USB peripherals that they already have: they will continue being compatible to the new pattern.

A very important detail is that USB 1.1 hubs cannot establish connections at 480 Mbps to peripherals connected to them. For example, if you have a USB 1.1 keyboard which has a built-in USB 1.1 hub, USB 2.0 peripherals connected to this keyboard will only get to communicate with the computer at 12 Mbps tops, and not at 480 Mbps. So, you should pay close attention to this detail.

The great advantage of the USB 2.0 over the FireWire is, therefore, the compatibility with the already existing USB peripherals. We also remind you that the FireWire has been basically designed to the audio and video market, which allowed video cameras and new professional audio and video equipment to be connected to the computer at a much lower cost than the usual necessary hardware for this kind of connection. We can say, therefore, that the USB and FireWire target market is, in a certain way, different. Only now the USB will be able to compete on this market, with its 2.0 version, and it may take a long time until we have audio and video equipment with USB connectors.

Toxicity
05-11-2007, 11:43 AM
Nice info Gazaly. Thanks !!

ICE
05-11-2007, 12:03 PM
They have developed wireless usb too

450 Mbps for 3 meters radius

110 Mbps for 10 meter radius

will be available soon ............

Anusha
05-11-2007, 12:12 PM
That's nice. It will save the ports by shorting out. Some people have destroyed their whole motherboard by short circuiting the USB ports wil plugging flash drives etc. :shocked:

ICE
05-11-2007, 12:16 PM
127 devices per one wusb port .

amazing..

Anusha
05-11-2007, 12:31 PM
127 devices per one wsub port .

amazing..
But, it's the same for a normal USB port as well.

ICE
05-11-2007, 12:52 PM
But, it's the same for a normal USB port as well.

but we have to have a usb hub ne...

Anusha
05-11-2007, 12:54 PM
but we have to have a usb hub ne...
Oh yeah. I get your point ;)

zawmer
05-18-2007, 11:55 PM
Good technical stuff man, very interesting..thnx
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

lahirumam
05-19-2007, 12:26 AM
Thnx.. ela macho.... :D:D