IP TOOL`s

[MaD-DoC]

Changing a Dynamic IP

First try re-booting your router or disconnecting and then re-connecting your internet.

If that doesn't work, then read on.

There are several ways to change your IP address (or at least showing different IP address to RapidShare). Whatever ways, you need to clear your web browser?s cookies first.

1. Request new IP address from ISP (for dynamic IP address Internet users only)

Click Start -> Run
Type cmd in the Open box, then click OK.
At the command prompt, run the following commands one by one:

ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit

Try to download from RapidShare again.
Note: It?s possible to put all the commands above into a batch file and simply run the batch file to complete the IP changing process. To create the batch file, use Edit in command prompt or Notepad, copy and paste the above commands into the editor, and save the file with extension of .bat or .cmd (for Notepad, change the File Type to All File too).
2. Use a proxy server, or a different proxy server

You can get a list of available public proxy server easily by searching ?proxy server? in search engine such as Google or Yahoo!. Choose a proxy server and note down its IP address and port number.

In Internet Explorer, go to Tools -> Internet Options -> Connections -> LAN Settings. Select (check) the option of Use a proxy server for your LAN. Then key in the proxy server IP address and port in respective box. Click OK to continue.

In Mozilla Firefox, go to Tools -> Options -> Connection Settings. Then select (click) Manual proxy configuration and key in proxy server information. Click OK to continue.

Obviously, once you hit the download limit, you will need to change the proxy server again. There are tools that help you to switch the proxy server automatically. In Internet Explorer, try Steganos Internet Anonym 2006 from Steganos or Hide IP from V7soft. In Firefox, use the SwitchProxy extension. Both software allow you to change the proxy server easily, with just few clicks.

[MaD-DoC]

Changing a static IP

I found this on a site. I hope it works.

-------------------------------------------------------------------------------------

One of the most common questions and complaints I get about cable broadband is that your IP address will not change. You were banned from your favorite gaming server server, a hacker keeps DoSing your system, or you just got +b'd for being a prick in IRC.

Whatever the reason (lets hope its the 2nd one), you might want to know that it is possible to change your IP. It is a bit trickier than just resetting your router or computer with DSL, but possible nonetheless.

First, lets learn a little bit about DHCP (Dynamic Host Configuration Protocol). Basically, what your router uses that assigns IP addresses automatically. It can also do other things, but right now we are concentrating on IP assignment. Your ISP has the same thing, only on a much wider scale.

The way DHCP assigns IPs, is it looks at the range of IPs it can assign, and then it looks at your MAC (Media Access Controller) address. The MAC address is also known as the physical address. It is basically how different equipment knows it is different from other equipment similar. DHCP looks at the MAC address and says, "Hmm...this router/computer is unique, I will assign it a unique IP." This IP is specific to that MAC address. If you changed your MAC address, your DHCP would change your IP, but if you set it back to what it was, your IP would go back to the original.

So, you may have figured out that to change your IP, you need to change your MAC address. Keep in mind, ISPs with static IP addresses don't exactly love you changing your IP. If you really don't want to take the small risk, don't do it.

So how do you change your MAC address? It is rather simple, actually. First, here is what you need to change.

A MAC address is made up of six octets (xx:xx:xx:xx:xx:xx). The octets of a MAC address each contain a hexidecimal number, so the available characters to use are (0-9) and (A-F). The first three octets are the Organizational Unique Identifier (OUI). This is basicically what the manufacturer uses to identify who made the product. You can use this to look up the first three octets and see who made the product. The last three octets are completely up to the manufacturer to assign.

A trick your ISP may use, is it make sure the first 3 octets are real, and available to use with the service. So do not change those. What you want to change is something in the last 3 octets.

Basically, go into your router configuration and change something about the last 3 octets. If your MAC address is 00:A0:40:3F:00:B4, you might want to make it 00:A0:40:3F:01:B4 . If you don't have a router, changing or spoofing the MAC address of your computer is also possible. You may be able to just change it, by going into your network adapter's properties in the device manager, and clicking the advanced tab. It could be under Network Address, MAC Address, Ethernet Address, etc. If there is no option here to change it, fear not, you can still spoof it with SMAC.

Now, you need to just simply reset your modem for this to take effect. If you find it does not work, change another digit of your MAC address. Your ISP will obviously not like it if two systems on its network have the same MAC address, thus having the same IP. So there is a very small chance you might have just changed your MAC address to someone elses. If it still doesn't work, your ISP may have put protective measures on your equipment to make sure the original MAC address would be the only one that can work on it. In this case, you should call your ISP and inform them that you have gotten a "new" router, and give them the MAC address so they can add it into the system.

[MaD-DoC]

Useful Software Downloads

Useful Software Downloads


DivX (http://download.divx.com/divx/DivXInstaller.exe) and XviD (http://download.divxmovies.com/XviD-1.1.2-01112006.exe)
Required for most downloaded tv shows & movies, ect.
(If you hear videos but dont see them, these are the solution)


DivX Pro
The Full Version of DivX
Windows: Rapidshare (http://rapidshare.com/files/32711674/divxWIN.rar) MegaUpload (http://www.megaupload.com/?d=83XM1LNW)
MAC: Rapidshare (http://rapidshare.com/files/32709916/divxMAC.rar)


BS Player Pro Version (http://rapidshare.com/files/32699465/BSPlayerPro-Multilingual--v2.21.950..rar)
Multifunctional media player for videos & dvds, ect. Subtitles can be added if you have the file


VLC Media Player (http://downloads.videolan.org/pub/videolan/vlc/0.8.6b/win32/vlc-0.8.6b-win32.exe)
Another media player that can be used to play lots of different types of files. More Information (http://www.videolan.org/vlc/)


HJSplit (http://www.freebyte.net/download/hjsplit.zip)
File Splitter/Joiner needed for some downloads


WinRAR 3.70 (Latest Version) + Activation
Used to compress & extract files. Files that end in .rar require this programe.
Demo (http://www.rarlab.com/download.htm) required first to extract this download

Rapidshare (http://rapidshare.com/files/35086083/winRar3.70.rar), MegaUpload (http://www.megaupload.com/?d=U41P6DU8)
( pass: saurav.co.uk )


Download Accelerater Plus 8.1.2.1 + Patch:
RapidShare (http://rapidshare.com/files/30180882/DAP_V8121.rar)
Can be used to speed up downloads from rapidshare, ect. Also useful if you want to pause downloads and resume them later on. More Information (http://www.speedbit.com/)
( pass if needed: saurav.co.uk )

[MaD-DoC]

Megaupload: Bypass "All download slots in use"

Megaupload: Bypass "All download slots in use"

For Firefox:
First go to

http://addons.mozilla.org/firefox/59/
Click Install Now to install addon.
Restart FF. Tool-->User Agent Switcher--->Options--->Options
Click User Agents--->Add
Type this:
+ Description: MEGAUPLOAD
+ User Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; Alexa Toolbar)
Click OK twice to finish adding User Agent.

From now, before downloading any file on megaupload just go Tools--> User Agent Switcher---> MEGAUPLOAD.

--------------------------------

For IE:

Start/run->> type regedit -> ok
Go to: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Wi ndows\CurrentVersion\Internet Settings\5.0\User Agent\Post Platform]

Note: if U use IE 7
go to: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Wi ndows\CurrentVersion\Internet Settings\User Agent\Post Platform]

Right click on Post Platform > New > String Value > type Alexa Toolbar > ok

Now U can download from megaupload without error : "All download slots (..) assigned to your country (....) are in use"